BatteryChange: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Change Battery for Crystal Button CB10 The front and back of Crystal Button is held together by a screw. Unscrew it to take apart the casing. Earlier versions of Crystal Button used a Philips type screw, but newer versions ,2020 and forward, uses a t6 torx-screw. A rubber-ring is holding the back- and front-pieces securely together. For a less time consuming change, please let this ring stay in place around the back piece of the case. Small plastic securings are welded...") |
(No difference)
|
Revision as of 12:54, 8 December 2023
Change Battery for Crystal Button CB10
The front and back of Crystal Button is held together by a screw. Unscrew it to take apart the casing. Earlier versions of Crystal Button used a Philips type screw, but newer versions ,2020 and forward, uses a t6 torx-screw. A rubber-ring is holding the back- and front-pieces securely together. For a less time consuming change, please let this ring stay in place around the back piece of the case. Small plastic securings are welded to the front piece, these do have a tendency to fall off, this won´t affect the function of the button. But if they do come loose, please make sure to remove them and throw them away.